Klipsch CS ARCHITECTURAL User Manual download pdf (Page 2)

ARCHITECTURAL SPEAKERS

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wider blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

This symbol indicates that there are important operating and maintenance instruc-

tions in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit.

WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or

moisture.

WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the

user’s authority to operate this device.

ABOUT YOUR KLIPSCH PURCHASE

Your new Klipsch architectural speakers have been designed to deliver great sound while

remaining unobtrusive wherever you install them. Your new in-wall or in-ceiling speakers

are suitable for use as front, center or surround channels in audio or home theater applica-

tions, or as part of a distributed sound system.

Minimum Tools Required

#2 Phillips Screwdriver

Wire strippers

Level

Stud finder

Saw

In-Wall Speaker Placement

Designed to function in any standard wall, ceiling or drop ceiling, Klipsch in-wall speakers

are engineered for years of performance. Minimum construction requirements call for dry-

wall or other mounting surfaces to be at least 3/8" thick (Figure 1).

To maximize performance, speakers should be placed at an equal distance from the listener

and along a common wall to ensure the best stereo effect. For background listening envi-

ronments (or when the listening position may vary widely), speaker placement may be

wherever is most convenient, although in these cases stereo imaging may be lost.

In-Ceiling Speaker Placement

Designed to function in any drywall or drop ceiling, Klipsch in-ceiling speakers are engi-

neered for years of performance. Minimum construction requirements call for drywall or

other mounting surfaces to be at least 3/8" thick. In drop ceiling installations, typical "drop

in" 2’ x 4’ and 2’ x 2’ ceiling tiles are composed of low density materials which have the

potential over time to sag and vibrate audibly. To maximize the acoustic performance of

your in-ceiling speakers, Klipsch recommends you replace the original mounting panel with

1/2" to 3/4" plywood or medium density fiberboard (MDF) (Figure 2).

Speaker Installation (for New Construction, skip to step #3)

1. Cut the appropriate size opening in the wall or ceiling using the template provided. If the

template is not available, cutout dimensions are provided on the Klipsch website,

www.klipsch.com. Sizes listed are minimum. If accuracy of cut cannot be achieved, you

may add 1/4" to each dimension. Be careful not to cut through any existing wiring or

plumbing. Avoid compromising any fire stops between studs.

2. Run speaker wiring (18 gauge minimum) to the openings. Be sure to comply with all

building codes in your area.

Figure 1

Figure 2

1 2 3 4

Comments to this Manuals

No comments

Klipsch CS ARCHITECTURAL User Manual Page 2

Comments to this Manuals